qualifications
  • On March 28, 2011, EPA published the final rule for Minimum Competency Requirements for Air Emission Testing. This rule established that on or after March 27, 2012, all Part 75 relative accuracy test audits and stack tests performed under Part 75 Appendix E or section 75.19 be performed by an ‘‘Air Emission Testing Body.’’ An AETB is a company that can provide to the owner or operator the certification required by § 6.1.2(b) of Appendix A to Part 75.

    Alliance Source Testing meets these requirements and can provide relevant documentation demonstrating conformance with ASTM D7036-04.

  • All of our project managers and team leaders (along with over 75% of entire testing staff) have obtained status as a Qualified Source Testing Individual (QSTI). The QSTI program was developed to increase the competency of the source testing industry, and the program is administered by the Source Evaluation Society (SES) as a service to the industry. There are five groups of tests representing all applicable methods for source testing (Group I, Group II, Group III, Group IV, and Group V).

    The goal of the SES QSTI exam and abilities assessment is to determine whether the candidate demonstrates knowledge and the ability to apply source testing methods and fundamental engineering and chemistry principles in a manner consistent with that of a field test team leader. In addition to thorough and practical knowledge of source testing methods, those principles include an understanding of elementary physical gas laws and chemistry, basics of safety and hazardous material handling, and primary theories of source testing (e.g., isokinetic and proportional sampling). The candidate is expected to exemplify and demonstrate professional and ethical conduct not only during the exam process but also in representing SES as a QSTI.

    This program is consistent with the mission of SES to advance the applied sciences relating to source evaluation with respect to air pollution and air pollution control by:

    • promoting the development of concepts and techniques relating to the field;
    • encouraging related professional development and knowledge;
    • striving to ensure the highest professional standards by its members.
  • Alliance Source Testing maintains an extensive health and safety program that meets or exceeds the requirements of our customers as well as the Occupational Safety and Health Administration (OSHA) and Mine Safety and Health Administration (MSHA). Additionally, we are certified with a number of third party safety verification organizations including ISNetworld, BROWZ, PICS, and PEC Safety.

    Alliance takes the safety of our team seriously and each of our team members is provided with the following training on an annual basis.

    Safety programs include:

    • Aerial Lift
    • Fall Protection
    • Elevated Work Spaces
    • Ladder Safety
    • Electrical Hazards
    • Hazard Assessment
    • Hazard Communication (Hazcom)
    • Personal Protective Equipment (PPE)
    • Bloodborne Pathogen
    • Respiratory Protection
    • Compressed Gases
    • Noise Exposure
    • CPR/First Aid
    • Hydrogen Sulfide Plan
    • MSHA Rights & Responsibilities
    qualifications_isn
    qualifications_browz
    qualifications_pics
    qualifications_pics
    qualifications_pics
    qualifications_pics
    qualifications_pics
  • Quality Programs

    The Quality Program is designed to ensure the accuracy, precision, and reliability of the data generated, as well as the use of the approved methodologies in the generation of that data. AST operates a rigorous quality program that consists of the following elements.

    • internal quality assurance program
    • quality control procedures
    • feedback and corrective action procedures
    • quality assurance system annual review
    • internal audits
    • standard operating procedures

    Analytical Lab Services

    Alliance Source Testing’s Decatur, Alabama laboratory has been accredited by the Louisiana Environmental Laboratory Accreditation Program (LELAP) to The National Environmental Laboratory Accreditation Council (NELAC) standards as administered through The NELAC Institute  (TNI).  In addition, the Decatur, AL laboratory has been granted secondary accreditation from the Texas Commission on Environmental Quality (TCEQ). NELAP Logo  nelac Logo

    Stack Testing Services

    Alliance Source Testing’s Little Rock, AR office has been accredited by the Louisiana Environmental Laboratory Accreditation Program (LELAP) to The Louisiana Administrative Code (LAC) 33:I.4501.A.2.

    Other Website Links

    www.nelac-institute.org

    www.deq.louisiana.gov

    www.tceq.texas.gov
Copyright © 2012 Red Sage site
Website Development by Red Sage Communications
Toll Free 855-4stacks | sales@stacktest.com
www.stacktest.com | Connect with us on linkedin